System - Hisense 65WR60AE Manual

System

CallMaster
Set the caller ID to on/off.
When the CallMaster is on, the device automatically switches to the corresponding channel when it
detects a new signal input.
NOTE
Part of signal sources do not support this function.
Soft Source
It is the designated source channel for external PC. The soft control signal is transmitted to external PC
via the soft source channel.
The soft source has five options: HDMI-Input1, HDMI-Input2, DP, VGA and ALL. When HDMI-Input1,
HDMI-Input2, DP or VGA is selected, only the selected channel is available; when ALL is selected, HDMI-
Input1, HDMI-Input2, DP and VGA are all available.
Serial Status
Display the current serial port status.
HDMI Version
Select the HDMI version: HDMI 1.4, HDMI 2.0.
NOTE
Only available in HDMI and DP channels.
HDMI Output Setting
Select HDMI output setting: 1080P 60Hz, 4K 60Hz.
4K 60Hz is 4K RGB 4:4:4 60Hz. The device at least supports HDMI2.0 protocol and HDMI cable also
conforms to HDMI2.0 protocol. Otherwise, signals may not display or display problems. Optical fiber
transmission is preferred when transmission distance is long.
LAN Share
Set to share via LAN or external network. When the LAN Share is on, the content of conference minutes
and other information can be shared by scanning only in the same LAN.
Settings
12