Hisense 65WR60AE Manual page 15

Connection
Use of external interface of touch screen and selection of touch unit
This device has a TOUCH port. When you need to use an external PC as the touch unit and signal source unit, you can
connect USB ports of the device and PC with a USB cable (one end is A-male and the other end is B-male), , connect
the PC to the device with signal cable (HDMI, VGA and DP cable), and switch the signal source to that channel. At this
time, the touch screen can be connected to the corresponding unit, and the touch screen can be used to perform touch
operation on the unit.
On the home page, the device is used as the touch unit. In HDMI, VGA and DP channel, the device is used as the
touch unit by default. When the external unit is connected and powered on, and the USB cable is connected to the
external unit, the touch unit is changed to external PC.
To operate the device, you can use the five-point touch method to call out the soft control menu and operate the
device. After operation, tap any area out of the soft control menu of the device to hide the soft control menu. Then you
can continue to operate the external PC, and the current channel is set as the touch input channel.
9