Hisense 65WR60AE Manual page 13

Connect to HDMI input
Connect the HDMI input connector of the device to the HDMI output port of an external device.
Device port
NOTE
The supported signal formats of the HDMI port refer to Specifications.
Connect to HDMI output
Connect the HDMI output connector of the device to the HDMI input port of an external device.
Device port
NOTE
When using it as a TV monitor, carefully read precautions for still image of the device.
Connect to DP interface device
Device port
NOTE
The supported signal formats of the DP port refer to Specifications.
Part of lower version DP cables may cause screen flashing or no displaying, please try to use cables in
latest version and high quality.
Part of input RGB signals may occur low quality situations in low or high brightness mode. To adapt the
picture quality, you can press the
Picture menu, and then select All.
Connect to USB interface device
The total current of all the USB output ports of the device when connected to external devices at the same time mustn't
exceed 2500mA, or else the device failure caused by overcurrent isn't covered by the warranty.
External device
Device port
NOTE
This device is connected to wireless keyboard and mouse devices. If there is any insensitivity
phenomenon during use, you can try to change the wireless receiver to another USB port, or use USB
extension cord to connect the wireless receiver in order to enhance the receiving range.
Connection
Set-top box/player/PC/DVD
HDMI
Settings button on the remote control, select Dynamic Range in the
7
HDMI out
VCR/TV monitor
HDMI
HDMI in
PC