Table of Contents
Advertisement
Battery replacement method
1.
Disconnect the battery cover from the remote control at the battery cover buckle and open the
battery cover.
2.
Insert two AAA 1.5V alkaline batteries. Note that the positive (+) and negative (-) terminals of the
batteries must match the positive (+) and negative (-) terminals in the battery case.
3. Close the battery cover from top to bottom until it is fully aligned with the remote control.
Precautions
1. If the remote control is not working properly, is unstable, or can't control the device, please replace
the batteries.
2. If you do not use the remote control for a long time or the battery is exhausted, remove the battery.
(Waste battery pollute the environment and must be handled properly.)
3. In order to achieve the best remote control effect, please point the black launch window on the
back of the remote control at the indicator light of the device.
Effective range
1. Remote control distance: The distance from the front of the remote control is valid within 8m.
2. Remote control angle: With the remote control receiving window of the device as the apex, the
angle in horizontal direction at the distance of 6m is at least ±30°, and the angle in vertical direction
is at least ±15°.
Remote Control
5
Hide quick links:
Advertisement
Table of Contents
