Erasing A File (Image); Erase - Ricoh RDC-6000 Operation Manual

Erasing a File (Image)

This section explains how to erase recorded files. There are three ways to erase files:
single file deletion, deletion of all files and deletion of multiple specified files.
Important
• Remember that files cannot be restored once they are erased. Before
Note
starting to erase a file, make sure that you want to erase it.
• Files on a write-protected SmartMedia memory card cannot be erased
Note
unless the write protect pad is removed from the card. See "Protecting
Against Accidental Writing" (p.29).
• Depending on the SmartMedia capacity, it may take a short time to erase
a file after turning on the power or changing the mode dial.

Erase

The selected file is erased.
q Set the mode dial to [
An erase menu will be displayed.
w Press the
or
[SINGLE IMAGE] and press the ENTER
button.
Select
e Press the
or
image file to erase, and press the shutter
release button.
The image file selected is erased. If you want to
erase more files, repeat step e above.
86
].
button to select
button to select an
MENU[ERASE]
SINGLE IMAGE
ALL IMAGES
SELECTED IMAGES
Select

ERASE

1/12
SINGLE IMAGE
START:RELEASE
EXIT