Connecting The Pc4701 - Renesas M38000TL2-FPD User Manual

3.3 Connecting the PC4701

To connect the emulation pod to the PC4701, use the 120-pin flexible cable included with this product
package. Connect the PC4701 side connector of the 120-pin flexible cable to the cable connector of
the PC4701, then secure with screws.
Figure 3.2 shows how to connect the PC4701 and 120-pin flexible cable.
Figure 3.2 Connecting the PC4701 and cable
Note on Connecting the Cable:
Note on Securing the Screws:
• Always shut OFF power before connecting the cable. The power ON state could
destroy internal circuits.
• After connecting the emulator main unit to the cable, be sure to secure the screws.
( 22 / 54 )
CAUTION