Table of Contents
Advertisement
【TAKE】Button
When CIUS power on, system default is HDMI input signal. To switch signal, press CVBS,VGA,DVI or SDI. For
example, to switch to VGA, push【VGA】button and the button flashes. Keep pressing【TAKE】button for 3s，
enter switch mode as follows. Press【TAKE】again, it will bring the VGA signal to output.
【TAKE】is default 1s duration of FADE. To adjust the duration time, push【MENU】, turn the knot to select
<TRANSITION> menu. Press the knob and turn to select DURATION. Press the knob again and turn the knob to
select time. DURATION time range from 0.1s to 1.0s. Press 【TAKE】 again, it will bring the adjusted FADE mode to
screen.
By【TAKE】, users can preview on LCD the signal format and resolution of the picture about to show on the big
screen therefore the accuracy of picture can be ensured.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
INPUT：HDMI
TAKE：VGA
OUTPUT：1920X1080@60
INPUT：VGA
TAKE：HDMI
OUTPUT：1920X1080@60
MODE
>DURATION
ALPHA
DEINTERLACE
I
MAGE ENHANCE
support@rgblink.com
FADE
1s
0
ON
OFF
|
www.rgblink.com
8 / 28
Advertisement
Table of Contents
