Regulatory - RayTek 3i Operator's Manual

Note: When you simultaneously press the MODE and ACTIV ATE buttons while in the
RUN loop, the instrument is reset to its RUN loop factory default settings (stored data
is unaffected). In the LOG loop, pressing the MODE and ACTIV ATE buttons not only
resets the instrument to its LOG loop factory default settings, but also clears all previ-
ously stored data. In both cases, the instrument will "beep" after reinstalling the
default settings. Section 3.6 lists default setting for each model as well as non-model-
specific default settings and range values.
3.7

REGULATORY

The appropriate regulatory approvals and certificates have been issued as follows:
• FDA Class II Laser Certification
• FDA Class IIIa Laser Certification
• IEC Class 2 Laser Certification
• IEC801-3 (EN50082) for EMI susceptibility
3-6 Raynger 3i Series Operator's Manual