Setup Loop-To Setup And Activate Alarms And Features; Setup Values For Run - RayTek 3i Operator's Manual

2.4.7 SETUP Loop–To Setup and Activate Alarms and Features
The SETUP loop is for setting up and activating alarms and features in either the RUN
or LOG loops.

2.4.7.1 SETUP Values for RUN

Figure 2-10 illustrates SETUP for the RUN loop.
RUN RUN
LOG
LOG
SET
The display changes
to show temperature
in °C or °F
ANA
Selected
RUN RUN
LOG
LOG
SET
Press the ACTIVATE
button to toggle
between DIG or ANA
Raynger 3i Series Operator's Manual
F/C Mode
°C °F
LOG RCL SET
HI ( ) LO ( ) T amb
RECALL MODE ACTIVATE ACTIVATE
Press the ACTIVATE
• • • •
button to toggle
RECALL MODE LOCK LOCK
between °C or °F
LASER
LASER
MODE
DOI Mode
°C °F
RUN RUN LOG RCL SET
LOG
LOG
HI ( ) LO ( ) T amb
SET
RECALL MODE ACTIVATE ACTIVATE
• • • •
RECALL MODE LOCK LOCK
LASER
LASER
DIG
MODE
Selected
LOG RCL °C °F
SET
HI ( ) LO ( ) T amb
RECALL MODE ACTIVATE ACTIVATE
• • • •
RECALL MODE LOCK LOCK
LASER
LASER
DIG/ANA Mode
TRIGGER
Released & Unlocked SET & RUN
Figure 2-10: SETUP Loop–RUN Values
HAL Mode
LOG RCL SET °C
RUN RUN
LOG LOG
MODE
HI ( ) LO
SET
RECALL MODE
• •
RECALL MODE
Turn the High
LASER
Alarm (HAL) on
LASER
or off with the
ACTIVATE Button
MODE
LOG RCL
RUN RUN SET
LOG
LOG
HI ( ) LO ( )
SET
Time (in seconds)
RECALL MODE
between data
• •
transmissions RECALL MODE
LASER
Press or to
LASER
change the interval
(from 1 to 9999 seconds)
MODE
RUN RUN LOG RCL SET
LOG
LOG
MODE
HI ( ) LO ( )
SET
RECALL MODE
• •
RECALL MODE
LASER
LASER
TAM Mode
BUTTON LOOP ICON
SET
°F
( ) T
amb
ACTIVATE ACTIVATE
• •
Change the High
LOCK LOCK
Alarm setpoint with
the and buttons
LAL Mode
°C °F
T amb
Turn the Low
Alarm (LAL) on
or off with the
ACTIVATE
Button
ACTIVATE ACTIVATE
• •
LOCK LOCK
Change the Low
Alarm setpoint with
the and buttons
Last temperature
value changes if
T is activated
amb
°C °F
T amb
Change the TAM
ACTIVATE ACTIVATE
• •
setpoint with the
LOCK LOCK
and buttons
Turn the Ambient
Temperature (T )
amb
on or off with the
ACTIVATE Button
2-19