Polycom RMX DOC2579D Getting Started Manual page 64

Chapter 2-First Time Installation and Configuration
2-34
Table 2-10 Fast Configuration Wizard – PRI Settings (Continued)
Field
Num Plan
Net Specific
Dial-out Prefix
20 Click Next.
The Span Definition dialog box opens.
Description
Select the type of signaling (Number Plan) from the
list according to information given by the service
provider.
Default: ISDN
Note: For E1 spans, this parameter is set by the
system.
Select the appropriate service program if one is
used by your service provider (carrier).
Some service providers may have several service
programs that can be used.
Default: None
Enter the prefix that the PBX requires to dial out.
Leave this field blank if a dial-out prefix is not
required.
The field can contain be empty (blank) or a numeric
value between 0 and 9999.
Default: Blank