Hardware Installation And Setup; Installing The Rmx 1500 - Polycom RMX DOC2579D Getting Started Manual

Hardware Installation and Setup

Installing the RMX 1500

The RMX 1500/RMX 2000 unit should be mounted in a 19"rack in a well
ventilated area. The RMX 4000 unit can be mounted in a 19" or 23"rack in
a well ventilated area. It is important to adhere to the Site Requirements as
described in the RMX 1500 & RMX 1500/2000/4000 Hardware Guides, "Site
Requirements" on page 1-3.
For detailed instructions, precautions and requirements for installing the RMX
1500 refer to the Polycom RMX 1500 Hardware Guide.
The following procedures have to be performed to install the RMX 1500 in
your site:
• Installing the RMX in a rack or as a standalone
• Connecting the RMX 1500 to the power source
• Connecting the network (LAN, IP and ISDN) cables to the RMX.
Polycom RMX 1500/2000/4000 Getting Started Guide
2-9