Resource Management; Resource Capacity - Polycom RMX DOC2579D Getting Started Manual

Multipoint control unit, getting started guide for audio only
Table of Contents

Advertisement

Chapter 3- Audio Only Basic Configuration and Operation

Resource Management

Resource Capacity

Resource
RMX 1500
Type
MPMx Full
Capacity
Voice (total
360
or IP only)
Voice
120
(PSTN
only)
3-16
RMX units that are used mainly for voice (Audio Only) conferencing can
maximize the resources utilization by designating all or almost all system
resources as voice (audio) resources.
Up to 400 (RMX 1500)/ 800 (RMX 2000 with two MPM+) or 720 (RMX
2000 with two MPMx)/1600 (RMX 4000 with four MPM+/MPMx-D)
voice participants can connect to the RMX, of which up to 400 participants
can connect using PSTN/ISDN connection.
The RMX 1500 supports only MPMx cards.
The RMX 2000 can support three card types: MPM, MPM+ and MPMx.
The RMX 4000 can support two card types: MPM+ and MPMx.
MPM+ cards offer higher capacity. Three MPM+ card assemblies are
available, MPM+ 80, MPM+ 40 and MPM+ 20, offering various port
capacities.
MPMx cards offer a high capacity similar to MPM+.
Table 3-2 summarizes the resource capacities of an RMX with the various
card types.
Table 3-2
Resource Capacities per Card and for Full Capacity RMX
RMX 2000
MPM Full
Capacity
400
400
Maximum Possible
RMX 2000
RMX 2000
MPM+ Full
MPMx Full
Capacity
Capacity
800
720
400
400
RMX 4000
RMX 4000
MPM+ Full
MPMx Full
Capacity
Capacity
1600
1440
400
400

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RMX DOC2579D and is the answer not in the manual?

This manual is also suitable for:

Rmx 1500Realpresence rmx 4000Rmx 2000

Table of Contents