First Entry Power-Up And Configuration; Procedure 1: First-Time Power-Up - Polycom RMX DOC2579D Getting Started Manual

First Entry Power-up and Configuration

There are four procedures necessary for setup of the new RMX. It is
important that they are performed in the following sequence:
Preparations
1
2
Hardware 3
Installation
4
and
Setup
First Entry
Power-up and
Configuration

Procedure 1: First-time Power-up

To power-up for the first time using the USB key:
1
First-time Power-up
Product Registration.
Connection to MCU.
Modifying the Default IP and ISDN/PSTN Service Settings (Fast
Configuration Wizard).
Insert the USB key containing the modified IP addresses in USB port
on the RMX 1500 front panel and RMX 2000/4000 back panel.
Polycom RMX 1500/2000/4000 Getting Started Guide
2-19