Table of Contents
Advertisement
The IP Network Service is created and confirmed.
16 Click OK.
During the initial RMX setup, if the system detects the presence of the
RTM ISDN card, the ISDN /PSTN Network Service definition screens of the
Fast Configuration Wizard are enabled.
If there is no RTM ISDN card in the RMX or if you do not want to define
an ISDN/PSTN Network Service, go to Step 33..
A new ISDN/PSTN Network Service can be defined even if no RTM ISDN card is
installed in the system but only via the ISDN/PSTN Network Service ->Add New
Service dialog box.
The Fast Configuration Wizard's ISDN/PSTN configuration sequence
begins with the ISDN/PSTN dialog box:
Polycom RMX 1500/2000/4000 Getting Started Guide
2-31
Advertisement
Table of Contents
Need help?
Do you have a question about the RMX DOC2579D and is the answer not in the manual?
Questions and answers