Table of Contents
Advertisement
Chapter 2-First Time Installation and Configuration
2-24
Table 2-3
Fast Configuration Wizard – IP Signaling
Field
Network Service
Name
Signaling Host
IP Address
Media Card 1-4
IP Addresses
Subnet Mask
If Secured Communication is required on the RMX: complete the Fast
Configuration Wizard, Login, install the Certificate and then enable Secured
Communication Mode.
2
Click Next.
Description
The name Default IP Service is assigned to the IP
Network Service by the Fast Configuration Wizard.
This name can be changed.
Note: This field is displayed in all IP Signaling dialog
boxes and can contain character sets that use
Unicode encoding.
Enter the address to be used by IP endpoints when
dialing in to the MCU.
Dial out calls from the RMX are initiated from this
address.
This address is used to register the RMX with a
Gatekeeper or a SIP Proxy server.
Enter the IP address(es) of the media card (s)
(MPM/MPM+/MPMx 1 and MPM/MPM+/MPMx 2-4
(if installed)) as provided by the network
administrator. Endpoints connect to conferences
and transmit call media (video, voice and content)
via these addresses.
Enter the subnet mask of the MCU.
Default value: 255.255.255.0.
Advertisement
Table of Contents
