Connecting Cables On The Rmx 4000 - Polycom RMX DOC2579D Getting Started Manual

Chapter 2-First Time Installation and Configuration
2-18

Connecting Cables on the RMX 4000

To connect the cables (AC and DC systems):
• RTM-IP 4000:
— Connect the Management Network cable to LAN 2.
— Connect the Signalling cable to LAN 3.
— Connect the Shelf Management cable to LAN 6.
• For each installed RTM LAN - Connect the LAN cable to LAN 2.
• For each installed RTM ISDN:
— Connect the E1/T1 cables to their PRI Ports.
— Connect the LAN cable to LAN 1.
LAN Connections to RTM LAN
Signalling
Network
Management
Network
Off/On
switch
Figure 2-3 RMX 4000 Rear Panel View with AC Power and Communication
Cables
E1/T1 Connection to RTM ISDN
Power Cables
Shelf
Manage-
ment