Polycom RMX DOC2579D Getting Started Manual page 114

Chapter 3- Audio Only Basic Configuration and Operation
3-38
Table 3-6 New Participant – General Properties (Continued)
Field
SIP Address/
Type
(SIP Only)
Endpoint
Website IP
Address
(IP only)
Audio Only
3
Click OK.
The new participant is added to the Participants list.
You can save the participant properties to the Address Book so you
can easily invite the participant to future conferences.
Description
Select the format in which the SIP address is written:
•
SIP URI - Uses the format of an E-mail address,
typically containing a user name and a host name:
sip:[user]@[host]. For example,
sip:dan@polycom.com.
•
TEL URI - Used when the endpoint does not
specify the domain that should interpret a
telephone number that has been input by the user.
Rather, each domain through which the request
passes would be given that opportunity. As an
example, a user in an airport might log in and send
requests through an outbound proxy in the airport.
If the users enters "411" (this is the phone number
for local directory assistance in the United States),
this number needs to be interpreted and
processed by the outbound proxy in the airport,
and not by the user's home domain.
In this case, tel: 411 is the correct choice.
Note: This field is removed from the dialog box when
the ISDN/PSTN protocol is selected.
Enter the IP address of the endpoint's internal site to
enable connection to it for management and
configuration purposes.
This field is automatically completed the first time that
the endpoint connects to the RMX. If the field is blank
it can be manually completed by the system
administrator. The field can be modified while the
endpoint is connected
Select this check box to define the participant as a
voice participant, with no video capabilities.