Polycom SpectraLink 1725-36038-001 Administration Manual page 92

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
Softkeys
Softkey Name
<< Cursor backward
>> Cursor forward
Answ Answer
Bksp Backspace
character
Back Back one screen
End End Call
Favr Favorites
Logs Call Logs
Hold Hold
Msg Message
Mute Toggle muting
OK OK
Redl Redial
Rej Reject
Resm Resume
Save Save
92
Displayed during...
Entering a dial number.
Entering a dial number.
Incoming call on the selected
line.
Entering a dial number.
Displaying a menu.
An active call on the selected
line.
Prior to entering the first
character of a dial number
Standby mode
In an active call.
Initial dial screen when new
line is selected and a dial
tone is active prior to
entering first character of the
number to be dialed.
In an active call.
Power up registration if
username is not configured
in Admin menu.
Prior to entering the first
character of a dial number.
Incoming call on the selected
line.
In an active call and you
have placed the call on hold
or in standby mode if any call
is on hold.
Entering a dial number as a
forward destination.
Press to...
Move the cursor back one position.
Move the cursor forward in
alphanumeric mode, if the cursor is
at the end of the line, adds a space
character.
Answer the call (equivalent to START
key).
Delete the character prior to the
cursor position.
Exit the menu.
Terminate the call without going back
to standby mode.
Activate the Favorites menu.
Open the Call Log menu.
Place the call on hold. The line status
shows when the call is on hold or
when audio is flowing.
Initiate a call to the specified
message center contact address for
retrieval or administration of
voicemail.
Toggle audio transmission to the far
end. The line status shows
not muted or when muted.
Send the username and password to
the SIP server for authorization to
register the handset.
Redial the last number that was
dialed.
Reject the incoming call. The SIP
server will then redirect the call
elsewhere.
Resume a call that was previously
placed on hold or that went on hold
when another line was activated.
Save the dial number as the
forwarding destination for the
selected line.
PN: 1725-36038-001_N.docx
when