Polycom SpectraLink 1725-36038-001 Administration Manual page 71

PN: 1725-36038-001_N.docx
The
Delete [PAC/Cert.]
the phone. When the authentication method is EAP-FAST the
PAC on the phone is deleted. If the RADIUS server has enabled
"anonymous in-band PAC provisioning ", then the phone will
automatically re-acquire these credentials from the RADIUS
server over the air. When the authentication method is PEAP or
EAP-FAST manual provisioning , the credential on the phone is
deleted and a new one needs to be downloaded through the HAT.
See additional details in
Enrollment and EAP-FAST Manual PAC Provisioning
later in this chapter.
are used to change the priority settings for various
–
QoS DSCP tags
classes of packets as they are transmitted to the network from the
Wireless Telephone. Default values are given but may be overwritten:
= , =
Voice 46 Control 26
Regulatory Domain/802.11 Config/Transmit Power
Regulatory domain, 802.11 configuration and transmit power are
interdependent. See Appendix A: Regulatory Domains
domain setting specifications. Polycom recommends that you check
with local authorities for the latest status of national regulations for
both 2.4 and 5 GHz wireless LANs. A regulatory domain must be
selected in order for the handset to operate. There is no default
setting.
FCC requirements dictate that the menu for changing the regulatory
domain be available by password, which in our case is the
Press and then navigate to the desired domain. Press
LINE
the domain.
- North America
01
– Europe
02
– Japan
03
– Singapore
04
– Korea
05
– Taiwan
06
– Hong Kong
07
Mexico, India
08 –
Configure Each SpectraLink Wireless Telephone
: Option removes expired credentials from
WPA2 Enterprise PEAP Certificate
, O her = .
t 0
section
for regulatory
key.
LINE
to set
NavOK
71