Installing The Seat And Footrest Assemblies - Bruno ELECTRA-RIDE II Installation Manual

INSTALLATION
INSTALLING THE SEAT ASSEMBLY
Residential and Commercial Units
bolt
protrudes
3/8"
(9.5 mm)
Optional Large Seat with Fixed Arms
(1540 Style)
©2009,1996 BRUNO INDEPENDENT LIVING AIDS, INC.®
1. Feed the five-conductor lead through
the hollow tube under the seat.
2. Insert the seat frame post into the
outer mounting tube.
3. Determine the correct seat height,
then insert the bolt in the corre-
sponding hole. Make sure the head
of the bolt protrudes 3/8" (9.5 mm)
from the mounting tube.
4. Fish the excess wires into the hole on
front pivot bolt.
outer
mounting
tube
front pivot bolt
16
SRE-1550 02-09-2009