Operation; Standard Swivel Seat - Bruno ELITE SRE-2010 Operator's Manual

The SRE-2010 includes
a "soft-start" feature
which prevents the
unit from moving
abruptly the instant
the UP/DOWN switch
is pressed.
Press and hold the
switch for a moment
to begin the gentle
acceleration of the
stairlift to operating
speed.
Depressing and holding the rocker
switch will cause the carriage to move
until the carriage stops
automatically at the upper or lower
end of the stair rail, or until the switch
is released.
Two (2) remote transmitters enable
you to move the carriage to or from
either end of the stair rail.
Remote transmitters are designed to
call / send an empty seat only!
The transmitters are NOT designed to
move a seat with a person on board.
©Bruno Independent Living Aids, Inc.
keyswitch
7
®

STANDARD SWIVEL SEAT

1. Turn the carriage keyswitch to ON.
2. At the top of the stairs, swivel the seat.
a. Position yourself in the seat.
b. Fasten the positioning belt.
c. Rotate the seat so that you are at
right angles to the rail (with your
back to the stairway wall).
A safety switch prevents operation
of the SRE-2010 unless the seat is
locked in position at right angles
to the rail (the "riding" position).
3. Position both feet securely on the footrest
and place your arms on the armrest
cushions.
4. Press and hold the rocker switch (located
on the front edge of one of the armrests)
to travel UP / DOWN the rail.
5. Once you have reached the top or bottom
landing, and the unit has stopped, release
the rocker switch.
6. Swivel the seat to prepare for exiting the
unit.
7. Unbuckle the positioning belt and carefully
exit the seat.
8. Swivel the empty seat back to its locked
position.

OPERATION

SRE-2010 OPERATOR 02-08-2019