Lubrication - Bruno ELECTRA-RIDE II Installation Manual

SRE-1550 02-09-2009
PRIOR TO LUBRICATION
run the carriage up and down the rail 5-
6 times. This will clean the paint chips
out of the gear rack. Vacuum or brush
the gear rack and rail to remove any
paint chips loosened during this
operation. Once the gear rack and rail
are clean and free of paint debris,
proceed with lubrication.
These instructions apply to
carriages with nylon wheels.
If you are lubricating a
carriage with steel wheels,
apply the grease to the rail and
the gear rack teeth.
Apply a light coating of white lithium
grease to the gear rack teeth only.
29

LUBRICATION

©2009,1996 BRUNO INDEPENDENT LIVING AIDS, INC.®