Carton Contents - Bruno ELECTRA-RIDE II Installation Manual

***NOTE: Rail
sections must
have matching
numbers
stamped on the
sections.
SRE-1550 02-09-2009
The ELECTRA-RIDE
contents of the cartons against the list below to be sure you
have all of the components before beginning an installation.
Report any discrepancies to Bruno Independent Living Aids
immediately.
Also, check the carton contents for shipping damage upon
receipt. Damage claims must be filed by the dealer, not the
manufacturer. Bruno Independent Living Aids cannot be
held responsible for shipping damage.
CARRIAGE BOX
(1) complete carriage assembly
(4) Velcro® strips (2.5" ea.)
(2) call/send transmitters
(2) mounting plates, call/send transmitters
(1) call/send transmitters with hardware kit
(2) SRE-K-2701 residential transmitters
(2) SRE-K-0055A commercial call/send transmitters
INSTALLATION BOX
(1) tube white lithium grease
(1) final limit switch ramp assembly
(2) bumper assemblies
(1) SRE-K-1553 bumper assembly parts kit
(10) 11" lg wire ties
(32) sheet metal screws (m 6.3 x 50 mm)(16' rail);
(40) for (20' rail)
clamp sets:
• 9 (16' rail) • 11 (20' rail) • 13 (24' rail)
• TBD** (custom rail)
**depends upon rail length
• upon request: clamps, adjustable, 9 lbs. ea.
(1) SRE-K-1501 electrical parts kit
SEAT BOX
(1) seat assembly
(1) footrest assembly
(1) battery charger
RAIL BOX
(1) ea. rail section ***
RAIL BOX WITH JOINT PLATE
(1) ea. rail section ***
(1) ea. joint plate
(1) SRE-K-1502 hardware kit (joint plate)
5

CARTON CONTENTS

II is shipped in 5 cartons. Check the
TM
---or---
©2009,1996 BRUNO INDEPENDENT LIVING AIDS, INC.®