Standard Swivel Seat - Bruno ELITE Operator's Manual

Standard Swivel Seat

Swivel Positions: The Elite Curve seat, with standard
armrests, swivels a total of 135 degrees. The seat locks in
three positions: the center "home" position and 60 and 90
degrees at the top landing. (Some installations allow the
chair to swivel 45 degrees to the bottom
How to Rotate Seat: Swivel the seat at the top landing to
safely exit away from the steps. Lift the release handle
located under the seat (on either side of the chair). Once the
swivel lever is released, the seat will lock in the closest 60-
or 90-degree position
Flip-Up Seat: Save space on your stairs when your stairlift is
not in use by flipping up the seat and armrests.
CIRCUIT BREAKER
Note: The stairlift includes an ON/OFF switch with a
built-in circuit breaker that protects the battery,
controller and motor circuits in the stairlift carriage.
It is unlikely the circuit breaker will trip. However, if
the stairlift becomes inoperative, check the circuit
breaker and reset if needed. Possible causes of
circuit breaker tripping:
• Foreign object jamming the rail or gear rack.
• Exceeding the rated weight capacity of the
stairlift.
SRE-2010E OPERATOR 01-14-2022
OPERATION
landing.)
6
Swivel release
handle
Circuit breaker
Bruno Independent Living Aids, Inc.