Table of Contents
Advertisement
INSTALLATION
Necessary Tools
Be sure you have all
necessary
parts and tools before
traveling to
installation site.
NOTE:
THE STANDARD
STAIRWAY ELEVATOR
IS SUITABLE FOR
STAIRWAY ANGLES UP
TO 45 DEGREES.
©2009,1996 BRUNO INDEPENDENT LIVING AIDS, INC.®
• protractor level, builder's level
• socket set, metric
• ratchet, with 6" extension
• combination wrench set, metric
• Phillips screwdrivers
• slotted screwdrivers
• Allen wrenches, metric
torque wrench (one that handles 50-80 ft.lb./68-108 Nm)
•
• electric drill with letter `O' (.316") and 1/4" bit
• hacksaw with 2 or 3 blades, or metal cutting
bandsaw
• 20' tape measure
• small rubber mallet
• C-clamp
• flashlight
• 5/16" open-end wrench
• needle nose pliers
• scissors or knife
• extension cord
• double-sided foam tape
• file
• 12" adjustable wrench
• additional hardware for installation on floor surface(s)
other than wood
Bruno ships the Stairway Elevator with fasteners
appropriate for WOODEN STAIR TREADS ONLY.
Other stair material may require different fasteners.
Please contact Bruno Independent Living Aids, Inc.
for information.
6
(10 mm through 22 m)
(22 mm through 36 mm)
(4 mm minimum size)
SRE-1550 02-09-2009
Hide quick links:
Advertisement
Table of Contents
