Table of Contents
Advertisement
E2730A VXI RF TUNER
3.4.9 FACTORY CONFIGURATION MESSAGES
Command
#CDT nrf,nrf,nrf
#CDT?
#COP
#COP?
OPERATION
The commands in this message category, which begin with the pound sign
(#), are valid only when the tuner is in configuration mode.
commands are used to configure the tuner's EEPROM with parameters
required for proper operation. These parameters should not be altered
without factory direction. To use these commands the tuner must first be
placed in the configuration mode by sending the CFG 1 User Configuration
command (refer to Table 3-14). After setting the configuration parameters,
the tuner must be removed from the configuration mode by sending CFG 0.
The mnemonics associated with this message category are listed in
Table 3-15.
NOTE:
Many of these parameters are unique to the particular tuner
serial number and should not be changed.
Table 3-15. Factory Configuration Messages
Response
Set the date of configuration.
Field
#CDT nr1,nr1,nr1
Request the configuration date.
Default: #CDT 01,01,2000
Example: #CDT 06,25,1997
Set the options configured in the unit.
Bit
0
1
2
3
4
5
6
7
#COP nr1
Request the options configured in the unit.
Default: #COP 00000
Example: #COP 00000
Description
Parameter
1
Month
2
Day
3
Year
Options
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
These
Range
1 to 12
1 to 31
0000 to 9999
3-29
Advertisement
Table of Contents
