Table of Contents
Advertisement
Command
ADV
AFC nrf
AFC?
AGC nrf
AGC?
AGP nrf
AGP nrf
AGP?
AGP?
AMD?
AMP?
ATD
ATE nrf
ATE?
ATF nrf
ATF?
ATS nrf
ATS?
BFO nrf
BFO?
BUP nrf
BUP?
BWA?
BWC nrf
BWC?
BWL?
BWS nrf
BWS?
BYP nrf
BYP?
3-22
Table 3-13. Compatibility Messages
Response
AFC 0
AGC 0
AGP 0
AGP 0
AMD ***
AMP ***
ATE 0
ATF 0
ATS 0
BFO +0.00
BUP 0
BWA 1
BWC 0000.00000
BWL
0000.00000,0000.000
00,...,0000.00000
BWS 1
BYP 0
Description
Advance to the next frequency if the current state
is active.
Select AFC mode.
Request AFC mode.
Select the gain control mode.
Request the gain control mode.
Set Analog to digital Gain Protection function
on/off – IGNORED
Turn ADC Gain Protection OFF or ON
Request setting of the AGP - always returns 0
Request ADC Gain Protection Setting
Query AM Average Detector Value
Query AM Peak Detector Value
Attenuation Dump.
Set ATE Attenuator – IGNORED
Query value of ATE Attenuator
Set Final Attenuator
Query value of Final Attenuator
Set Second IF Attenuator
Request current value of Second IF Attenuator
Set BFO frequency.
Request current BFO frequency.
Sets the sample Bin Update option.
Request the status of the Bin Update parameter.
Request actual active IF bandwidth number.
Select IF bandwidth by size ( in MHz)
Request selected IF bandwidth size
Request IF bandwidth list.
Select IF bandwidth by bandwidth number.
Request selected IF bandwidth number.
Set the Preselector Bypass mode.
Request the Preselector Bypass Mode Status.
E2730A VXI RF TUNER
OPERATION
Advertisement
Table of Contents
