Table of Contents
Advertisement
Command
RSR?
RLK nrf ?
#RVB nrf?
SAC nrf
SAC?
SAO nrf
SAO?
SDW nrf
SDW?
SGS?
SGV?
SLM?
SLP nrf
SMC
SME nrf
SME?
SMM nrf
SMM?
SMR?
SMS nrf,nrf
SMS?
SMT
SPI?
SQL?
SQL nrf
SSD?
SSO nrf
SSO?
3-26
Table 3-13. Compatibility Messages (Continued)
Response
RSR 00000
LCK
nr1,0000.0000,
0000.0000
#RVB
nr1,0000.00000
SAC 0
SAO 0
SDW 001
SGS ****
SGV
1,1,****,****
SLM 200
SME 000
SMM 0
SMR 000
SMS 0000,0000
SPI 1
SQL 000
SSD
SSO -1
Description
Read the Receiver Status Register.
Recall the specified lockout channel.
Request
Video
Bandwidth
Bandwidth Slot
Suspend Action Control register.
Request Suspend Action Control register
setting.
Set the selected audio output on or off.
Return the current SAO condition.
Set the signal dwell time for sweep or step.
Request the current signal dwell time.
Request Signal Strength
Request list of SPI, CST, SGS, and FMO signal
values.
Request the available space in lockout memory
in unused channels.
Put radio into Sleep mode
Shared Memory Clear
Set Shared Memory Enable Register
Request current value of Shared Memory
Enable Register
Shared Memory Data Type
Request Shared Memory Data Type
Request current value of Shared Memory Status
Register
Set Shared Memory FIFO Programmable Levels
Request the current Programmable Empty and
Full levels, respectively.
Issue Shared Memory Trigger
Request the status if the IF spectrum.
Request squelch level in negative dBM
Set squelch level in negative dBm
Request the Sweep/Step LOG display data
collected during the sweep or step operation.
Disable or setup and enable the sweep/step data
output function (SSD).
Request the setup status of the sweep/step data
output function (SSD).
E2730A VXI RF TUNER
Settings
by
OPERATION
Advertisement
Table of Contents
