Table of Contents
Advertisement
E2730A VXI RF TUNER
Command
SST?
STL?
STL nrf,... nrf
or
(nrf:nrf),...(nrf:nrf)
SUS
SWD nrf
SWD?
SWL nrf,nrf,nrf,
nrf, nrf, nrf, nrf,
nrf, nrf, nrf
SWL?
SWO nrf
SWO?
SWS?
SYN
TLM nrf
TLM?
TPE nrf
TPE?
TPS nrf,nrf
TPS?
ULC nrf
UPB
VBC nrf
VBC?
VBL?
VBM nrf
VBM?
VBS nrf
VBS?
VOL nrf
VOL?
OPERATION
Table 3-13. Compatibility Messages (Continued)
Response
SST 0
STL
SWD 1
SWL
SWO 0
SWS 0
TLM 0
TPE 0
TPS 0,1
VBC 0000.00000
VBL
0000.00000,0000.0
0000,...0000.00000
VBM 1
VBS 01
VOL 0
Description
Request Step operation status.
Request the step channel list.
Enter a step channel list.
Suspend the sweep or step operation.
Select sweep direction for sweep immediate.
Request current sweep direction.
Set the sector sweep list.
Returns the current sector sweep list.
Select the type of sweep operation.
Request the current sweep operation.
Request Sweep operation status.
Issue Sync Pulse to Master radio of a DF set
Set the Third LO Mode.
Request the current Third LO Mode.
Set trigger pair enable.
Trigger pair enabled status.
Selects the two VXI trigger lines for the Shared
Memory Trigger and the F-Sync Pulse,
respectively.
Requests the VXI trigger line setting.
Unlock the channel.
While stopped or suspended on a signal, update
the sample bin.
Set Video Bandwidth by bandwidth size. (in
MHz)
Request Video Bandwidth Size
Request List of Video Bandwidths in unit.
Set Video Bandwidth Mode
Request Video Bandwidth Mode
Set Video Bandwidth by Slot Number
Request Current Video Bandwidth Slot
Set Headphone Jack Volume
Request Current Headphone Volume
3-27
Advertisement
Table of Contents
