Table of Contents
Advertisement
E2730A VXI RF TUNER
Command
#CBW nrf,nrf,...nrf
CHN?
#CLG?
CLT nrf
CLT?
CMP nrf,nrf
CMP?
COD nrf
COD?
COR nrf
COR?
CQU
CST?
#CVB nrf,nrf,...nrf
DBM nrf
DBM?
DBT nrf
DBT?
DCM nrf
DCM?
DCR nrf
DCR?
DDF nrf
DDF?
DET nrf
DET?
DIM nrf
DIM?
DIS nrf
DIS?
DRF nrf
DRF?
DSO nr1
OPERATION
Table 3-13. Compatibility Messages (Continued)
Response
CHN 0
CLG nr1,nr1,...nr1
CLT 0000
CMP 001,1
COD 0
COR 00
CST 1
DBM 0
DBT 8
DCM 0
DCR 0
DDF 0
DET 1
DIM 0
DIS 0
DRF 0
Description
Set IF Bandwidth Data
Request current memory channel accessed for
sweep or step operation.
Request dBm Table. Always returns 0.
Set COR loss timer.
Request current COR loss timer value.
Set the sweep data compression ratio.
Request the status of the sweep compression ratio
selection.
Set COR Output Delay Timer - IGNORED
Query COR Output Delay Timer Setting – always
returns 0
Set COR level.
Request current COR level.
Clear the signal queue.
Request current COR status
Set Video Bandwidth Data – IGNORED
Set data representation in SSD buffer
Request current SSD data representation.
Set data width (number of bits) in Digital Scan
Output
Request Digital Scan Output data width
Set DSP Clock Mode
Request Current DSP Clock Mode
Sets the value of the Delta COR parameter.
Request the value of the Delta COR parameter.
Sets the value of the Decaying factor parameter.
Request the value of the Decaying factor parameter.
Select detection mode.
Request current detection mode.
Set DSP Idle Mode
Request DSP Idle Mode Status
Setup Digital Interface
Request current digital interface setup.
Sets the value of the Rising factor parameter.
Request the value of the Rising factor parameter.
Turns Digital Scan Output ON and OFF –
IGNORED
3-23
Advertisement
Table of Contents
