Service And Technical Support - Landoll Brillion SS108 Operator's Manual

BRILLION ELITE MINI MONITOR
System Update
The system update screen is used
to update to newer versions of
software or reset to factory default
settings.
UPDATES
APP VER: 2.1.1
UPDATE APP
FACTORY
RESET
Update App
The Update App button is used to
perform a system update to newer
version of software. To update
follow the following steps:
1. On a Micro SD Card, create a folder titled
"EliteUpdate" on the root level of the MicroSD Card.
Within this folder place the update file from Loup
Electronics, this should appear as a .srec file format.
2. Insert Micro SD Card into the Elite console and select
the "Update App" button. From the popup window
select the version you wish to update, newest soft
ware versions will appear at the top of the window.
3. Allow the application to load into the console and
when finished, cycle power to the console. The
update will finish installation upon startup.
4. Ensure the newest software is updated by selecting
the "MENU" button and checking the "APP VER"
number in the upper right corner.
Factory Reset
Selecting this will reset all settings
back to Factory Default. All existing
implements and sensors will be
removed from memory and need to be reinstalled if
choosing to reset the console.
4-8
TABLE OF CONTENTS
Service And Technical
Support
SYSTEM
UPDATE
Contact:
Address:
Phone:
BACK
Fax:
E-mail:
UPDATE
APP
FACTORY
RESET
Loup Electronics Inc.
2960 N. 38th Street
Lincoln, NE 68504
877-489-LOUP(5687)
402-464-7131
402-464-7104
info@loupelectronics.com
AFTER HOURS/WEEKEND SUPPORT
402-318-6415 OR 402-853-6249
9K713-0522