Main Screen Layout - Landoll Brillion SS108 Operator's Manual

Overview
The Brillion Elite Mini Monitor is a full featured display
designed to provide accurate information to the operator
for Ground Speed and Acres Planted, Seeder Unit Clutch
Control, Seed Shaft Rotation, and Bin Level. This Chapter
will familiarize you with operation and technical
information. All aspects and features are detailed but may
not be applicable to your system configuration.
• Ground Speed (Implement mounted Ground Speed
Sensor, Radar, GPS Speed or Simulated Speed)
UP TO 6
SMART SHAFT
SENSORS
SEEDER UNIT
CLUTCH CONTROL
SPEED & ICON
SELECTION
FIELD
AND TOTAL
ACRES

Main Screen Layout

Speed & Icon Selection
Implement Speed will display in
lower left corner of the display. To
change the tractor color, tap the
tractor icon in the lower left corner to prompt a menu. From
the pop-up, select the color.
Field & Total Acres
NOTE
Acres seeded accumulate only for
the seeder sections that have the
clutch engaged "ON/Green".
Touch Field or Total Acres to toggle between them.
Clear Field Acres: Touch and hold field numbers for
3 seconds. Field Acres Reset Screen will pop-up. Select
"Yes Confirm".
Clear Total Acres: Touch and hold total numbers for
3 seconds. Total Acres Reset Screen will pop-up, select
"Reset Total Acres". Warning Screen will pop-up, select
9K713-0522
TABLE OF CONTENTS
Brillion Elite Mini Monitor
9:30AM
1
CLUTCH
1
0.0 0.0
MPH FIELD
Figure 4-1: Main Screen Display (Sure Stand Seeder)
0.0
MPH
0.0
FIELD
• Field Acres and Total Acres
• Clutch Control
• (Up to 6) Six Seed Shaft Rotation Sensors
• (Up to 6) Six Hopper Level Sensors
• Clutch Master On/Off Switch
WARNING
High Power Magnet in use. See "High Power
Magnet" on 1-2.
1 2
MASTER
OFF
MENU
"Yes Confirm". Password Screen will pop-up. Enter
4-digit password.
Alarms
When an alarm is sounded a popup
message will display the active alarm. You
may choose to either clear that single
alarm or clear all alarms to clear the popup
and silence the display.
A flashing yellow button will display next to the Menu Button
to signify alarm(s) that are currently active. Select the yellow
alarm button to go to the Alarms Screen which will outline
all current alarms active on the console. The flashing
indicator will not disappear until all alarms have been
resolved.
ACTIVE ALARMS
GENERAL ALARMS:
SHAFT 1 LOW RPM
BIN 1,2 EMPT
Chapter 4
UP TO 6
BIN LEVEL
SENSORS
CLUTCH
MASTER ON/OFF
SETTINGS
MENU
ALARMS
BACK
COMM ERRORS:
NO COMM ERRORS
4-1