Mellanox Technologies TX6100 MetroX Series Hardware User Manual page 25

MetroX 12-Port QSFP InfiniBand Long Haul System Hardware User Manual
6. Copper Cable Connecting/Disconnecting
Copper cables are heavy and not flexible, as such they should be carefully attached to
or detached from the connectors. Refer to the cable manufacturer for special warnings
and instructions.
7. Rack Mounting and Servicing
When this product is mounted or serviced in a rack, special precautions must be taken
to ensure that the system remains stable. In general you should fill the rack with equip-
ment starting from the bottom to the top.
8. Equipment Installation
This equipment should be installed, replaced, or serviced only by trained and qualified
personnel.
9. Equipment Disposal
Disposal of this equipment should be in accordance to all national laws and regula-
tions.
10. Local and National Electrical Codes
This equipment should be installed in compliance with local and national electrical
codes.
11. Hazardous Radiation Exposure
Caution – Use of controls or adjustment or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
CLASS 1 LASER PRODUCT and reference to the most recent laser standards:
IEC 60 825-1:1993 + A1:1997 + A2:2001 and EN 60825-1:1994+A1:1996+ A2:2001
Mellanox Technologies
Rev 1.1
25