Reset Button; Figure 10: Bad Port Led; Table 6: Bad Port Led Configurations - Mellanox Technologies SwitchX User Manual

Rev 1.3
3.1.1.4 Bad Port LED
This is a one color LED
Flashing Orange — received symbol
error
The Bad Port indicator is located on the left side of the connector side panel of the unit. The fol-
lowing Bad Port conditions are possible.
Table 6 - Bad Port LED Configurations
LED Configuration
Off
Flashing Orange
This LED shows symbol errors. Possible causes for this are:
• Bad cable
• Bad connection
• Bad connector
This LED lights up when one or more ports is receiving a symbol error. The LED immediately
goes off until the next symbol error is received.
3.1.1.5 UID LED Switch Identifier
The UID LED is a debug feature that lights a blue LED on the switch connector side panel for
ease in finding a particular switch.
3.1.2

Reset Button

On the connector side panel under the system LEDs is a reset button. This reset button requires a
tool to be pressed.
DO NOT use a sharp pointed object such as needle or push pin for pressing the Reset
button. Sharp objects can cause damage, use a flat object to push the reset button.
20 Mellanox Technologies

Figure 10: Bad Port LED

OK – No symbol errors have been received in last few seconds
Error – One or possibly more ports have just received a symbol error
UID
1
2
!
PS1
PS2
!
UID
RST
Description
Basic Operation and Installation