NEC Express5800 User Manual page 120

6-6 Installing and Using Utilities
Create Support Disk
NEC EXPRESSBUILDER CD-ROM contains a number of device drivers and utilities
that you can put on floppy disks and load onto your system.
Using this menu creates a support disk by copying from the NEC EXPRESSBUILDER
CD-ROM. If your system has the Windows operating system, you may find it more
convenient to use NEC EXPRESSBUILDER for Windows-based to make support disks.
Write the displayed title on the floppy disk label, which is useful for management in the
future. Customers are to provide a floppy disk to create a support disk.
– Windows Server 2003 x64 Edition OEM-DISK for NEC EXPRESSBUILDER
Creates a support disk for installing Windows Server 2003 x64 Editions.
– Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER
Creates a support disk for installing Windows Server 2003 Standard Edition and
Windows Server 2003 Enterprise Edition.
– ROM-DOS Startup FD
Creates a support disk for starting the ROM-DOS system.
– Off-line Maintenance Utility Bootable FD
Creates a support disk for activating the Off-line Maintenance Utility.
– System Management FD
Creates a support disk for activating the System Management.
BIOS/FW/etc. Update
This menu allows you to update the software module such as BIOS and firmware of the
server by using the update disk (3.5-inch floppy disk) that is distributed from NEC
customer service representative.
After rebooting the system, an update program is started automatically from the floppy
disk, and the various BIOS and firmware programs are updated.
IMPORTANT: Do not turn off the server while the update program
is running. If the update processing is discontinued, the system
becomes unable to start.
System Management
The parameters of BMC (Baseboard Management Controller) are set for remote control
and alert.
Help
Displays explanations about various functions of NEC EXPRESSBUILDER.
Return to the Top Menu
Choosing this menu returns to the Top Menu.