NEC Express5800 User Manual page 69

See the table below for items.
Option Parameter
Set User Up to 7
Password alphanumeric
characters
Set Supervisor Up to 7
Password alphanumeric
characters
Password on [Disabled]
boot Enabled
Secure Mode [Disabled]
Timer 1 min
2 min
5 min
10 min
20 min
60 min
120 min
Hot Key [L]
(CTRL+ALT+) Z
Secure Mode [Disabled]
Boot Enabled
Power Switch [Disabled]
Inhibit Enabled
IMPORTANT:
user who has no user password.
In Secure Mode, the POWER switch, DUMP switch, keyboard, and
mouse are disabled, and the ScrollLock lamp, CapsLock lamp, and
Numlock lamp on the keyboard flashes sequentially.
To exit from Secure Mode, enter the user password using the keyboard.
Description
Press Enter to display the user password
entry screen. With a user password,
accessible SETUP menus are restricted. This
option is available only if the Supervisor
Password is specified.
Press Enter to display the supervisor
password entry screen. With the supervisor
password, all SETUP menus are available for
access. This option is available only when
you log into the SETUP utility with the
password "Supervisor".
Specify whether to request a password entry
at boot-up. User password setup is required
beforehand. When the supervisor password
is specified and this option is disabled, the
BIOS assumes that a system boot attempt is
made by a user.
It gives priority to "Secure Mode Boot" when
"Secure Mode Boot" and "Password on boot"
are set up in both.
Specify the period from no input from the
keyboard or mouse to the point at which the
system enters into the secure mode. If this
item is set to [Disabled], the secure mode
timer is unavailable.
Specify the key with which the secure mode is
started. Press the selected key while pressing
the Ctrl and Alt to start the secure mode.
Specify whether the system starts in the
secure mode or not.
Specify whether the POWER switch of the
CPU blade is enabled or disabled. If Enabled,
the POWER switch cannot be used to power
off the CPU blade. (The forced shutdown, by
pressing the POWER switch for 4 seconds or
longer, is available.)
The Secure Mode is used to restrict an access from a
Configuring Your Server 4-19
Your Setting
[ ]: Factory-set