Appendix B
Installing the Operating System
SETUP AND RE-SETUP OF CPU BLADE OF DISKLESS
MODEL
Local Installation
Before the installation, make sure that the CPU blade is connected with the keyboard, display unit,
DVD-ROM drive and floppy disk drive. If any device is not connected, always connect it to the
CPU blade.
Notes
Before starting the local installation, read the notes described here carefully.
Key entry
Conduct key entries while the access lamp on the USB floppy disk drive is off (or the floppy disk is
not accessed).
System update
If the system configuration is modified, always provide the system update by using NEC
EXPRESSBUILDER CD-ROM shipped with the system. See Chapter 6 for details.