Setting For Solving Problems; Memory Dump (Debug Information) - Windows Server 2003 - NEC Express5800 User Manual

B-24 Installing the Operating System

SETTING FOR SOLVING PROBLEMS

Setup the following issue in advance so that your computer can recover from any trouble precisely
and as soon as possible when it should occur.

Memory Dump (Debug Information) - Windows Server 2003 -

This section describes the procedures for collecting memory dump (debug information) in the
server.
IMPORTANT:
The staff of maintenance service representative is in charge of
collecting memory dump. Customers need only to specify the
memory dump.
If any trouble occur after specifying the process below, the message
to inform that the system is in short of virtual memory may appear,
but continue to start the system. If you restart the system in such case,
memory dump may not be stored correctly.
Follow the procedure below to specify.
1.
Select [Control Panel] and click [System].
The [System Properties] dialog box appears.
2.
Select [Advanced] tab.
3.
Click [Settings] on the [Startup and Recovery] group box.
Cautions for the Memory Dump