Setup Of Device Drivers; Installing The Lan Drivers - NEC Express5800 Series Installation Manual

Chapter 1 Installing Windows
3.5

Setup of Device Drivers

Install and set up device drivers provided for the standard configuration of the server.
For details regarding the installation and setup of a driver for an optional device, refer to the manual supplied
with the optional device.
3.5.1

Installing the LAN drivers

(1) LAN drivers
The drivers are installed by Standard Program Package.
(2) Optional LAN board
This server supports the following optional LAN boards.
Optional LAN boards: N8104-172/173/175/176/178/180/181/182/183/184/185/186
If you install the LAN boards after installing Standard Program Package, install Standard Program Package
again according to Chapter 1 (3.4 Standard Program Package Installation).
(3) Network adapter name
After installing the LAN drivers, the following network adapter names will be displayed on the Device Manager.
Network adapters for the standard configuration
HPE Ethernet 1Gb 2-port 332i Adapter #xx(*1)
If connecting with an optional LAN board:
[N8104-172]
[N8104-173]
[N8104-175]
[N8104-176]
[N8104-178]
[N8104-180]
[N8104-181]
[N8104-182]
[N8104-183]
[N8104-184]
[N8104-185]
Important
Wake On LAN (WOL) is supported by onboard network adapters and
N8104-172/173/175/176 only.
Wake On LAN is available after installing the LAN driver.
For Wake On LAN of N8104-172/175/176, when using Wake On LAN see
Chapter 1(3.5.2 Setting up LAN drivers - (2) Setting up Wake on LAN).
BIOS settings, check Maintenance Guide.
Note
 To change the LAN driver settings, sign in to the system from a local console
using an administrator's account. Remotely changing the settings by using the
operating system's remote desktop feature is not supported.
 Choose the Internet Protocol (TCP/IP) check box when specifying an IP
address.
HP Ethernet 1Gb 4-port 366FLR Adapter #xx(*1)
HPE FlexFabric 10Gb 2-port 533FLR-T Adapter #xx(*1)
HPE Ethernet 10Gb 2-port 562FLR-T Adapter #xx(*1)
Port1: HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter #xx(*1)
Port2: HPE Ethernet 10Gb 562SFP+ Adapter #xx(*1)
HPE Ethernet 1Gb 2-port 332T Adapter #xx(*1)
HP Ethernet 1Gb 2-port 361T Adapter #xx(*1)
HP Ethernet 1Gb 4-port 366T Adapter #xx(*1)
HPE Ethernet 10Gb 2-port 530T Adapter #xx(*1)
HPE Ethernet 10Gb 2-port 521T Adapter #xx(*1)
HPE Ethernet 10Gb 2-port 562T Adapter #xx(*1)
HPE Ethernet 10Gb 2-port 530SFP+ Adapter #xx(*1)
Express5800/R110j-1 Installation Guide (Windows)
Installing Windows Server 2016
45