MPEG FILE SPECIFICATIONS
The MINI-T-NX record channel, internal Output 2, is shared with the "Preview" output on
the rear panel. The "Preview" output is not an on-air channel, but is instead meant to be
connected to a television monitor so you may conveniently view the programming on any
input scheduled for MPEG recording or manually switched through the control panel to the
preview output (labeled "Rec/Prev" in WinLGX).
MINI-T-NX MPEG RECORDER OPTION SPECIFICATIONS
NOTE:
Video being fed to the MPEG recorder must have stable sync. Input signals
with copy protection are not recordable.
The MINI-T-NX internal recorder will only record for up to 6 hours.
Digital video recording results are based on a combination of the user-defined recording
presets and the quality of the input source. In each new MINI-T-NX image file, the MINI-
T-NX internal MPEG recorder is automatically configured for the recording presets named
"Good," "Better," and "Best" shown in Illustration 1.
Illustration 1, MINI-T-NX MPEG Recorder Default Recording Presets
LEIGHTRONIX, INC.
2018-06-08
MINI-T-NX
Introduction
Page 23
WinLGX ver. 6.0.1.48
Need help?
Do you have a question about the MINI-T-NX and is the answer not in the manual?