Leightronix MINI-T-NX Manual page 183

FIELD
In point (in To specify where in the selected file you would like playback to begin,
select the "In point" field and either type the desired file start point or
HH:MM:SS:FF,
where click the ellipsis button to open the control panel clip editor for the
FF=frames) MPEG player. If using the control panel, specify the in point as follows:
1. Specify the clip's playback start point using one of the following
2. Close the clip creation control panel and add changes to library
Out point (in To specify where in the selected file you would like playback to end,
select the "Out point" field and either type the desired file end point or
HH:MM:SS:FF,
where click the ellipsis button to open the control panel clip editor for the
FF=frames) MPEG player. If using the control panel, specify the out point as follows:
1. Specify the clip's playback end point using one of the following
2. Close the clip creation control panel and add changes to library
Length The MPEG file library resource length is automatically entered.
If the event is locked, the event start "Time" can be modified. This is the
Time
scheduled "On-Air" time of the event.
The "PLAY" command is automatically displayed.
Command
(Event start)
LEIGHTRONIX, INC.
2018-06-08
methods:

Click the button to start playing the file and click the
button at the desired spot.

Drag the playback bar to the desired spot and click the
button.

Click the or
(GOPs) in the MPEG file and click the
resource by clicking the
methods:

Click the button to start playing the file and click the
button at the desired spot.

Drag the playback bar to the desired spot and click the
button.

Click the or
(GOPs) in the MPEG file and click the
resource by clicking the
DESCRIPTION
button to move between groups of pictures
button.
button to move between groups of pictures
button.
MINI-T-NX
Software Operation
button.
button.
Page 181
WinLGX ver. 6.0.1.48