Related Manuals for Leightronix UltraNEXUS HD Blade
Summary of Contents for Leightronix UltraNEXUS HD Blade
- Page 1 PRODUCT QUICK GUIDE Hardware Setup | Network Configuration | WinLGX Software Installation | Web Control H.264 HD/SD Digital Video Server Television Automation...
-
Page 2: Hardware Setup
CVBS OUT connector. The BNC composite video outputs a scaled-down version of the high- definition signal. USB 2.0 Ports — Connect up to two (2) LEIGHTRONIX external hard drive units for up to four terabytes (4TB) of increased digital media storage capacity. -
Page 3: Subnet Mask Address
Network Configuration Entering the Front Panel Password From the front panel of your UltraNEXUS-HD Blade server, press the multidirectional switch right from any status screen to display the password entry screen. Press the switch right five (5) times to enter the default front panel password and NOTE: To replace the unit’s password, refer to the Changing Front Panel Password section access configuration menus. - Page 4 Use the WinLGX Controller Site Manager window to store your UltraNEXUS-HD Blade server’s network IP address information. WinLGX uses each server’s IP address to locate the server and send/receive system Visit www.leightronix.com/support.html and find Microsoft Visual C++ library window: This information.
-
Page 5: Web Control
Head to the Web Control section of the full product manual for more information on WebNEXUS and its functions. Support At LEIGHTRONIX, every customer of our standard product Looking for firmware/software or additional documentation? Go line receives technical support at no extra charge. There are to www.leightronix.com/support.html to download important...
Need help?
Do you have a question about the UltraNEXUS HD Blade and is the answer not in the manual?
Questions and answers