Related Manuals for Leightronix UltraNEXUS-HD Flex
Summary of Contents for Leightronix UltraNEXUS-HD Flex
- Page 1 PRODUCT QUICK GUIDE Hardware Setup | Network Configuration | WinLGX Software Installation | Web Control H.264 HD/SD Digital Video Server Television Automation...
- Page 2 COM 3 Port — RS-232 serial port with 9-pin male connector for future serial communications. USB 2.0 Ports — Connect up to two (2) LEIGHTRONIX external hard drive units for up to four terabytes (4TB) of increased digital media storage capacity.
- Page 3 Network Configuration Entering the Front Panel Password From the front panel of your UltraNEXUS-HD Flex server, press right [ ] from any status screen to display the password entry screen. Press right [ ] five (5) times to enter the default front panel password and access configuration menus.
- Page 4 Audio Files and Other under the File Type Password field: The last six digits of the UltraNEXUS-HD Flex server’s serial number. NOTE: Enter any letters Associations settings during installation. in uppercase (example 102A2A).
- Page 5 Open the UltraNEXUS-HD Flex web interface through one of the two following steps: If you already have WinLGX open and are logged into the desired UltraNEXUS-HD Flex unit’s IP address, select Web interface from the Tools menu or click the [ ] toolbar icon to open the web interface in your default web browser.
Need help?
Do you have a question about the UltraNEXUS-HD Flex and is the answer not in the manual?
Questions and answers