Subscribe to Our Youtube Channel
Related Manuals for Leightronix UltraNEXUS-HD X5
Summary of Contents for Leightronix UltraNEXUS-HD X5
- Page 1 PRODUCT QUICK GUIDE Hardware Setup | Network Configuration | WinLGX Software Installation | Web Control H.264 HD/SD Digital Video Server Television Automation...
-
Page 2: Hardware Setup
NOTE: The internal hard drive is non-serviceable. Press 1 on the power switch to power on the UltraNEXUS-HD X5. Connect the included power cable into the power cord receptacle of the UltraNEXUS-HD X5, and then plug the other end into a MAINS AC power source. -
Page 3: Subnet Mask Address
Network Configuration Entering the Front Panel Password From the front panel of your UltraNEXUS-HD X5 server, press right [ ] from any status screen to display the password entry screen. Press right [ ] five (5) times to enter the default front panel password and access configuration menus. - Page 4 Audio Files and Other under the File Type Password field: The last six digits of the UltraNEXUS-HD X5 server’s serial number. NOTE: Enter any letters Associations settings during installation. in uppercase (example 102A2A).
-
Page 5: Web Control
Open the UltraNEXUS-HD X5 web interface through one of the two following steps: If you already have WinLGX open and are logged into the desired UltraNEXUS-HD X5 unit’s IP address, select Web interface from the Tools menu or click the [ ] toolbar icon to open the web interface in your default web browser.
Need help?
Do you have a question about the UltraNEXUS-HD X5 and is the answer not in the manual?
Questions and answers