System Configuration - Renesas QB-78K0FX2L User Manual

QB-78K0FX2L In-Circuit Emulator

1.4 System Configuration

This section shows the system configuration when using the QB-78K0FX2L connected to a PC (Windows
TM
PC/AT compatible). Connection is possible even without optional products.
<5>
<1> Host machine
<2> Accessory Disk
<3> USB interface cable
<4> AC adapter
<5> QB-78K0FX2L
<6> Check pin adapter (optional)
<7> Emulation probe
<8> Exchange adapter
<9> Space adapter (optional)
<10> YQ connector
<11> Target connector
<12> Mount adapter (optional)
<13> Device
<14> Target system
R20UT2057EJ0100 Rev.1.00
2012.05.18
Figure 1-2. System Configuration
<3>
<4>
<6>
<7>
Case of 30pin devices
<8>
<12>
<9>
<13>
<10>
<11>
: Windows PC, IBM PC/AT compatible can be used
: Manual, etc.
: Cable connecting QB-78K0FX2L to host machine
: AC adapters classified by region
: This product
: Adapter used for monitoring waveforms with oscilloscope
: High-characteristic FPC type emulation probe
: Adapter that performs pin conversion
: Adapter used for height adjustment
: Connector that connects exchange adapter to target connector
: Connector soldered to target system
: Adapter used for mounting target device into socket
: Target device
<1>
<2>
Case of 16pin or 20pin devices
CHAPTER 1 GENERAL
TM
PC,
<8>
<11>
<14>
Page 13 of 37