Table of Contents
Advertisement
QB-78K0FX2L In-Circuit Emulator
Remark Insert the oscillator into the socket, take care for the pin 1 position.
(2) Internal high-speed oscillation clock
This method uses the clock inside the emulator by configuring the use of the high-speed oscillation clock in the
user program.
(3) Internal low-speed oscillation clock
This method uses the clock inside the emulator by configuring the use of the low-speed oscillation clock in the
user program.
R20UT2057EJ0100 Rev.1.00
2012.05.18
Figure 2-3. Mapping of Oscillator to Socket
CHAPTER 2 SETUP PROCEDURE
Page 22 of 37
Advertisement
Table of Contents
