quadient iX-3 Series Product Replacement Manual page 2

iX-3 Series Base
Product Replacement Guide
N3. Insert the Meter
Place the meter (i) into the meter bay and slide in until it fits securely
into position. Close the cover.
N7. Install the Feeding Table
Attach the feeding table (b) to the franking machine base.
N4. Install the Cartridge
Insert the ink cartridge (h) at an angle into the machine with the 'TOP' and
'LOCK' stickers facing upwards. Push the ink cartridge
of the machine until you hear a 'click' - close the cover of the machine.
N8. Switch on the machine
1 2
Swap base
This process allows you to
install your new base.
Turn on the machine by pressing the Once the machine is switched on, follow the steps on
power button. screen to complete the replacement procedure.
N5. Install the Weighing
Platform
Install the weighing platform
(h) towards the back
machine.
Next
N6. Connect the Cables
(d) on the Plug in the LAN cable (f), the weighing platform cable (e), and the
power cable (g).
Congratulations
Your machine is ready to use!
For more information or if you experience any
issues please visit :
kb.quadient.co.uk/ix3
A0139550/B
17/01/2022