Table of Contents
Advertisement
1. Using the Device for the First Time
Inserting the batteries
After you have unpacked your device, first insert the batteries. The battery
compartment 11 is on the bottom of the device. Insert the batteries (4 x 1.5 V, size AA),
thereby observing the indicated polarity.
Setting the date and time
1. After the new batteries are fitted, the year number flashes in the display. You can
set the year by pressing Memory button 3. To confirm and then set the month, press
the time button 4.
2. Press memory button 3 to set the month. Press the time button 4 to confirm and
then set the day.
3. Follow the instructions above to set the day, hour and minutes.
4. Once you have set the minutes and pressed the time button, the date and time are
set and the time is displayed.
5. If you want to change the date and time, press and hold the time button down for
approx.
7 - 8
seconds until the year number starts to flash. Now you can enter the new
values as described above
Selecting the correct cuff
Microlife offers different cuff sizes. Select the cuff size to match the circumference of
your upper arms (measured by close fitting in the centre of the upper arm).
Cuff size
for circumference of upper arm
S
17 – 22 cm
M
22 – 32 cm
M-L
22 - 42 cm
L
32 – 42 cm
L-XL
32 – 52 cm
Only use Microlife cuffs.
Contact your local Microlife Service if the enclosed cuff 12 does not fit.
Connect the cuff to the device by inserting the cuff connector 14 into the cuff
socket 3 as far as it will go.
Selecting the user
This device allows to store the results for 2 individual users.
→Select the intended user (User 1 or User 2) 23 by pressing the user button 5.
→Before each measurement, ensure that the correct user is selected.
Select the measuring mode: standard or MAM mode
Before each measurement, select standard (single measurement) or MAM mode
(automatic double measurement). In MAM mode, 2 measurements are automatically
taken in succession and the result is then automatically analysed and displayed.
Because blood pressure constantly fluctuates, a result determined in this way is more
reliable than a single measurement is performed.
Advertisement
Table of Contents
