Microlife B6 Advanced User Manual page 5

DO NOT:
Drop this device or expose it to strong vibrations; sensitive components may be

affected resulting in inaccuracies and/or operational issues.
Use the Blood Pressure Monitor outside of its specified operation temperature

and humidity rating, or if stored outside of its specified storage temperature and
humidity rating. Avoid storage in direct sunlight.
Use this monitor in areas containing high frequency (HF) surgical equipment,

magnetic resonance imaging (MRI) equipment, computerized tomography (CT)
scanners. This may result in incorrect operation of the monitor and/or cause an
inaccurate reading
Use this device in a moving vehicle; inaccurate measurements may result. Only

use this device in a home healthcare environment.
Use third party accessories. Only use Microlife authorized accessories, such as

cuffs or AC adapters, as those not approved for use with the device may provide
inaccurate measurements, injury, and/or damage the device.
STANDARDS
This medical device is compliant with:
Medical device and non-invasive blood pressure monitor standards IEC 60601-1,

IEC 60601-1-2, IEC 60601-1-11, and AAMI/ANSI/IEC 80601-2-30, and
Electromagnetic standards IEC 60601-1-2, along with FCC Part 15, and

Clinical Testing per standard ISO 81060-2:2013 was conducted on blood

pressure device using the same measurement technology.
Please note: According to international standards, your monitor should be checked for
accuracy every 2 years.
TYPE
IP20: Protected against solid foreign objects of 12.5 mm diameter and greater.
MR Unsafe
Expected Life
Monitor 5 Years
Cuff 2 Years
Batteries and electronic instruments must be disposed of in accordance with the
locally applicable regulations, not with domestic waste.
Data Transmission
This product emits radio frequencies (RF) in the 2.4 GHz band. DO NOT use this
product in locations where RF is restricted, such as on an aircraft or in hospitals. Turn