Table of Contents
Advertisement
You can also operate this device using rechargeable batteries.
* Only use «NiMH» type reusable batteries.
* Batteries must be removed and recharged when the flat battery symbol appears.
They should not remain inside the device as they may become damaged (total
discharge as a result of low use of the device, even when switched off).
* Always remove the rechargeable batteries if you do not intend to use the device for a
week or more.
* Batteries cannot be charged in the blood pressure monitor. Recharge batteries in an
external charger and observe the information regarding charging, care and durability.
6. Using a Mains Adapter
You can operate this device using the Microlife mains adapter (DC 6V, 600 mA).
* Only use the Microlife mains adapter available as an original accessory appropriate
for your supply voltage.
* Ensure that neither the mains adapter nor the cable are damaged.
1. Plug the adapter cable into the mains adapter socket 4 in the blood pressure
monitor.
2. Plug the adapter plug into the wall socket. When the mains adapter is connected,
no battery current is consumed.
7. Bluetooth® Function
Use the Bluetooth function to transfer data to <Microlife Connected Health+> App on
a smartphone (Android OS or iOS). Information available on:
https://www.microlife.com/technologies/connect
Bluetooth operations:
The Bluetooth® icon indicator on your blood pressure monitor, located in the upper
right portion of the screen, is designed to provide information about the connection
between your device and the monitor. Please note the following:
• The Bluetooth® of this monitor is a medical device data system (MDDS) as its only
function is for transfer of records and no additional functions. The Bluetooth® is not
active when the monitor is recording data or during blood pressure measurement.
The monitor will not sound any alarm with or without Bluetooth®. The Bluetooth® is
used only to transfer data from point A to point B. The App on your smart devices
cannot be used to start or stop the monitor, nor update the firmware of monitor via
Bluetooth®.
• The Bluetooth® icon on your blood pressure monitor will flash initially when ready to
connect with a device, and continue flashing for 2 minutes until a connection occurs.
Advertisement
Table of Contents
